Chemistry has an unusually large number of useful words beginning with T.
On this page
Some are fundamental concepts that appear almost immediately in chemistry courses: temperature, theoretical yield, titration, transition metal, triple bond and triple point. Others belong to more specialised areas, including tautomerism, thermogravimetric analysis, thin-layer chromatography, transesterification and the Tyndall effect.
T is also well represented on the periodic table. Ten element names begin with T, including tantalum, technetium, tellurium, tin, titanium and thorium.
This guide explains the most useful chemistry words beginning with T, separating core chemistry vocabulary from specialist terms and correcting a few entries that are often used too loosely.
Quick Answer
Useful chemistry words beginning with T include:
tantalum — element 73, symbol Ta
tautomer — one of two or more readily interconverting structural forms
tautomerism — equilibrium between tautomers
technetium — radioactive element 43, symbol Tc
tellurium — element 52, symbol Te
temperature — physical quantity describing thermal state
tennessine — synthetic element 117, symbol Ts
terbium — lanthanide element 65, symbol Tb
tetrahedral — geometry involving four directions around a central point
theoretical yield — maximum amount of product predicted from stoichiometry
thermal decomposition — breakdown caused by heating
thermal conductivity — ability of a material to conduct heat
thermochemistry — study of energy changes associated with chemical reactions
thermodynamics — study of energy, heat, work and equilibrium
thermogravimetric analysis — measurement of mass change with temperature or time
thin-layer chromatography — separation technique commonly abbreviated TLC
thiol — sulfur-containing organic functional group, R–SH
thallium — element 81, symbol Tl
thorium — radioactive element 90, symbol Th
thulium — lanthanide element 69, symbol Tm
tin — element 50, symbol Sn
titrant — reagent added during a titration
titration — quantitative analysis based on controlled reaction with a measured reagent
titration curve — graph showing a measured property as titrant is added
titanium — element 22, symbol Ti
toluene — aromatic hydrocarbon C₇H₈
toxicity — capacity of a substance to cause harmful effects
tracer — labelled substance used to follow a chemical or physical process
trans isomer — stereoisomer with specified groups on opposite sides
transesterification — conversion of one ester into another by exchanging its alkoxy group
transition metal — metal associated with partially filled d-subshell chemistry under common definitions
transition state — high-energy configuration along a reaction pathway
transmutation — conversion of one element or nuclide into another through nuclear change
trigonal planar — three-coordinate planar geometry
trigonal pyramidal — three-bonded-atom geometry with a lone pair on the central atom
triple bond — bond with formal bond order three
triple point — unique pressure and temperature at which three phases coexist in equilibrium
tritium — radioactive hydrogen isotope ³H
turbidity — cloudiness caused by suspended or dispersed material
Tyndall effect — scattering of light by colloidal particles
Why T Has So Many Chemistry Words
Unlike letters such as Y or Z, T appears in several productive scientific roots.
Thermo- gives us:
thermodynamics
thermochemistry
thermogravimetry
thermometric
thermal
Trans- gives us:
transition
trans isomer
transesterification
transmutation
Chemistry also uses many words beginning with tri- and tetra-, meaning three and four respectively.
That produces terms such as:
triple bond
trigonal planar
tetrahedral
T also happens to begin the names of ten chemical elements.
This makes it one of the stronger letters in an A–Z chemistry vocabulary series.
Chemical Elements That Start With T
There are 10 chemical elements whose current English names begin with T:
| Element | Symbol | Atomic number |
|---|---|---|
| Tantalum | Ta | 73 |
| Technetium | Tc | 43 |
| Tellurium | Te | 52 |
| Tennessine | Ts | 117 |
| Terbium | Tb | 65 |
| Thallium | Tl | 81 |
| Thorium | Th | 90 |
| Thulium | Tm | 69 |
| Tin | Sn | 50 |
| Titanium | Ti | 22 |
They cover almost every part of the periodic table, from transition metals and lanthanides to radioactive actinides and a synthetic superheavy element.
Tantalum
Tantalum is a chemical element with:
Symbol: Ta
Atomic number: 73
Group: 5
State at room temperature: solid
It is a dense, corrosion-resistant metal.
Tantalum is particularly important in electronic components because tantalum oxide can form an effective dielectric layer in capacitors.
It is also used in:
corrosion-resistant equipment
specialised alloys
medical implants
high-temperature applications
Tantalum’s strong resistance to chemical attack is reflected in its name, which derives from the mythological figure Tantalus.
Tantalum Pentoxide
Tantalum pentoxide, more systematically tantalum(V) oxide, has the formula:
Ta₂O₅
It is an important dielectric and optical material.
Applications include:
capacitors
optical coatings
electronic materials
The compound is particularly useful because of its electrical and optical properties.
Technetium
Technetium is a radioactive element with:
Symbol: Tc
Atomic number: 43
Its name comes from a Greek word associated with the idea of being artificial.
Technetium is historically important because it was the first element to be produced artificially and identified as a new element.
It has no stable isotopes.
Technetium-99m
Technetium-99m, written ⁹⁹ᵐTc, is a metastable nuclear isomer widely used in diagnostic nuclear medicine.
The m means metastable.
Technetium-99m emits gamma radiation suitable for medical imaging and has properties that make it practical for many diagnostic procedures.
This is a nuclear property rather than ordinary chemical reactivity, but it makes technetium particularly important outside the chemistry laboratory.
Tellurium
Tellurium is an element with:
Symbol: Te
Atomic number: 52
Group: 16
It is a relatively rare element with metalloid-like properties.
Tellurium is used in:
alloys
semiconductor materials
solar-cell technology
thermoelectric materials
glass and ceramics
Its name comes from tellus, the Latin word for Earth.
Tennessine
Tennessine is a synthetic chemical element with:
Symbol: Ts
Atomic number: 117
It is one of the superheavy elements.
Tennessine does not occur in bulk quantities that can be handled like ordinary laboratory chemicals. Only very small numbers of atoms have been produced through nuclear reactions.
It was named in recognition of contributions from institutions in Tennessee to research associated with superheavy elements.
Terbium
Terbium is a lanthanide element with:
Symbol: Tb
Atomic number: 65
It belongs to the group commonly known as the rare-earth elements.
Terbium compounds are used in specialised materials including phosphors and magnetic materials.
Its name traces back to Ytterby, the Swedish village that also contributed to the names yttrium, ytterbium and erbium.
Thallium
Thallium is a chemical element with:
Symbol: Tl
Atomic number: 81
It is a soft, heavy metal.
Thallium compounds are notably toxic, which has limited many historical uses.
Modern applications include specialised electronics, optical materials and research.
The word thallium derives from a Greek word meaning a green shoot or twig, referring to a bright green spectral line observed during its discovery.
Thorium
Thorium is a radioactive actinide element with:
Symbol: Th
Atomic number: 90
It occurs naturally in minerals.
Thorium has attracted attention as a potential nuclear-energy resource because thorium-232 can participate in fuel cycles that ultimately produce fissile uranium-233.
That does not mean thorium itself behaves exactly like conventional uranium reactor fuel; nuclear-fuel cycles involve several additional steps.
Thorium also has historical uses in specialised high-temperature materials.
Thulium
Thulium is a lanthanide element with:
Symbol: Tm
Atomic number: 69
It is one of the less abundant rare-earth elements.
Its specialised applications include lasers, radiation sources and certain electronic and optical materials.
The name derives from Thule, an ancient geographical name associated with the far north.
Tin
Tin is a chemical element with:
Symbol: Sn
Atomic number: 50
Group: 14
The symbol Sn comes from the Latin name stannum, which explains why it does not match the first letter of tin.
Tin has been used for thousands of years.
It is found in:
solder
metal coatings
bronze
alloys
chemical compounds
Bronze, historically one of the most important human-made alloys, is traditionally based on copper and tin.
Tin Oxides
Two common tin oxides are:
tin(II) oxide — SnO
and:
tin(IV) oxide — SnO₂
Tin can therefore occur in more than one oxidation state.
Tin(IV) oxide is also known as stannic oxide in older naming systems.
Titanium
Titanium is a transition metal with:
Symbol: Ti
Atomic number: 22
Group: 4
It combines relatively low density with high strength and excellent corrosion resistance.
Titanium is widely used in:
aircraft
medical implants
chemical-processing equipment
high-performance alloys
One of its most familiar compounds is titanium dioxide.
Titanium Dioxide
Titanium dioxide, formula:
TiO₂
is a white inorganic compound.
It is widely used as a pigment because of its strong ability to scatter visible light.
Applications include:
paints
coatings
plastics
paper
cosmetics
Different crystal forms of TiO₂ include rutile and anatase.
Tautomer
A tautomer is one of two or more structural forms that readily interconvert by movement of a proton accompanied by a rearrangement of bonding.
A classic example is:
keto–enol tautomerism
The keto and enol forms have the same overall molecular formula but differ in where a hydrogen is attached and where a double bond appears.
IUPAC describes tautomers as structural isomers that interconvert readily through processes commonly involving proton transfer.
Tautomerism
Tautomerism is the phenomenon in which tautomers exist in equilibrium.
A simplified keto–enol relationship can be written:
keto form ⇌ enol form
The equilibrium does not necessarily contain equal amounts of each form.
One tautomer may be much more stable and therefore dominate.
Factors affecting the equilibrium can include:
solvent
temperature
substituents
hydrogen bonding
conjugation
Keto–Enol Tautomerism
Keto–enol tautomerism is the most familiar example.
The keto form contains a carbonyl group:
C=O
while the enol contains:
C=C–OH
The transformation requires both proton movement and rearrangement of a double bond.
This distinguishes tautomerism from simple conformational change.
Temperature
Temperature is one of the fundamental quantities used throughout chemistry.
It affects:
reaction rates
equilibrium
solubility
gas pressure
phase changes
diffusion
viscosity
The SI unit of thermodynamic temperature is:
kelvin, K
Celsius temperature is also used extensively in practical chemistry.
A temperature change of one kelvin has the same magnitude as a change of one degree Celsius, although the zero points of the two scales differ.
Kelvin
The kelvin is the SI base unit of thermodynamic temperature.
Its symbol is:
K
Notice that we write:
300 K
not:
300° K
Kelvin does not use the degree symbol.
Celsius Temperature
Celsius temperature is measured in:
degrees Celsius, °C
The relationship with thermodynamic temperature is:
T/K = t/°C + 273.15
So:
0°C = 273.15 K
and:
25°C = 298.15 K
The kelvin scale is especially important in equations involving thermodynamics and gases.
Absolute Zero
Absolute zero corresponds to:
0 K
or:
−273.15°C
It is the lower limit of thermodynamic temperature.
It should not be described simply as the point where “all molecular motion stops”, because quantum systems can retain zero-point energy even at absolute zero.
Theoretical Yield
Theoretical yield is the maximum amount of product predicted from the stoichiometry of a reaction, assuming the limiting reactant is converted according to the specified reaction.
For example, stoichiometric calculations may predict:
12.0 g product
That value is the theoretical yield.
If only 9.0 g is actually isolated, the actual yield is lower.
Percentage yield can then be calculated as:
actual yield ÷ theoretical yield × 100
Because yield itself begins with Y, see the fuller explanation in Chemistry Words That Start With Y.
Tetrahedral
Tetrahedral describes an arrangement in which four positions point towards the corners of a tetrahedron around a central atom.
The ideal bond angle is approximately:
109.5°
Methane, CH₄, is the standard example.
Its carbon atom is bonded to four hydrogens arranged tetrahedrally.
Tetrahedral Geometry
In VSEPR terminology, four bonding domains with no lone pairs around a central atom commonly produce tetrahedral molecular geometry.
Examples include:
CH₄
and approximately:
NH₄⁺
If lone pairs replace some bonding groups, the electron-domain geometry may remain tetrahedral while the molecular shape changes.
For example:
NH₃ — trigonal pyramidal
H₂O — bent
Thiol
A thiol is an organic compound containing the functional group:
–SH
A general formula can be written:
R–SH
Thiols are sulfur analogues of alcohols.
A simple example is:
ethanethiol, CH₃CH₂SH
Many low-molecular-mass thiols have strong odours.
Thiol Group
The thiol group, –SH, is also called a sulfhydryl group in some contexts.
Thiols can undergo reactions including:
oxidation
substitution
metal binding
In biochemistry, thiol groups are particularly important in the amino acid cysteine.
Two cysteine thiols can be oxidised to form a:
disulfide bond
which is important in protein structure.
Thioether
A thioether is the sulfur analogue of an ether.
Its general structure is:
R–S–R′
Modern systematic terminology often calls these compounds sulfides, depending on context.
The amino acid methionine contains a thioether-like sulfur group.
Thiourea
Thiourea has the formula:
CS(NH₂)₂
It resembles urea structurally, except that sulfur replaces the oxygen atom.
Compare:
urea — CO(NH₂)₂
thiourea — CS(NH₂)₂
Thiourea is used in chemical synthesis, coordination chemistry and industrial processes.
Thionyl Chloride
Thionyl chloride, formula:
SOCl₂
is a commonly used laboratory reagent.
In organic chemistry, it is often used to convert:
carboxylic acids into acyl chlorides
and:
alcohols into alkyl chlorides
The reagent reacts readily with water and must be handled appropriately.
Thermochemistry
Thermochemistry is the study of heat and energy changes associated with chemical reactions and physical transformations.
Important thermochemical concepts include:
enthalpy
heat capacity
enthalpy of formation
enthalpy of combustion
bond enthalpy
A reaction releasing heat to its surroundings is commonly described as exothermic.
One absorbing heat is endothermic.
Thermodynamics
Thermodynamics deals with energy, heat, work, equilibrium and the direction of macroscopic processes.
Chemical thermodynamics helps answer questions such as:
Will a reaction be thermodynamically favourable?
How does equilibrium change with temperature?
How much energy is transferred?
Important quantities include:
internal energy, U
enthalpy, H
entropy, S
Gibbs energy, G
Thermodynamics does not by itself tell you how quickly a reaction will occur.
A reaction can be thermodynamically favourable but kinetically extremely slow.
First Law of Thermodynamics
The first law of thermodynamics expresses conservation of energy.
In one common chemical convention:
ΔU = q + w
where:
ΔU = change in internal energy
q = heat transferred to the system
w = work done on the system
Sign conventions must be used consistently.
Second Law of Thermodynamics
The second law of thermodynamics introduces entropy and provides criteria for the direction of spontaneous processes.
In chemical thermodynamics, spontaneity is often discussed using Gibbs energy under constant-temperature and constant-pressure conditions.
A negative:
ΔG
indicates thermodynamic favourability for the process as written under the specified conditions.
Thermal Decomposition
Thermal decomposition occurs when a substance breaks down because of heating.
For example, calcium carbonate decomposes at sufficiently high temperature:
CaCO₃ → CaO + CO₂
The process is important in:
industrial chemistry
materials processing
analytical chemistry
mineral chemistry
Not every substance decomposes before melting or boiling, but many do.
Thermal Conductivity
Thermal conductivity measures how effectively a material conducts heat.
Metals generally have relatively high thermal conductivity compared with many polymers or gases.
Thermal conductivity matters in chemistry and materials science when designing:
reactors
heat exchangers
insulation
electronic materials
Thermite
Thermite is a mixture that undergoes a highly exothermic redox reaction.
The classic example combines aluminium powder with iron(III) oxide:
Fe₂O₃ + 2Al → 2Fe + Al₂O₃
The reaction produces extremely high temperatures.
Thermite reactions have specialised industrial applications, but the mixture and reaction present serious burn and fire hazards.
Thermistor
A thermistor is an electrical component whose resistance changes strongly with temperature.
Thermistors are used in:
temperature measurement
control systems
laboratory instrumentation
They are more closely associated with electronics and instrumentation than with core chemistry, but chemistry laboratories frequently rely on them for temperature sensing.
Thermogravimetric Analysis
Thermogravimetric analysis, abbreviated TGA, measures the mass of a sample while temperature or time is controlled.
A sample may:
lose water
decompose
oxidise
lose volatile material
as it is heated.
A graph of mass against temperature can therefore provide information about composition and thermal stability.
TGA is widely used in:
polymer chemistry
materials science
inorganic chemistry
pharmaceutical analysis
Thermogram
Thermogram is a broad term for a record produced in a thermal-analysis experiment.
The exact meaning depends on the technique.
For clarity, analytical reports usually specify whether the data came from:
TGA
DSC
DTA
or another thermal method rather than referring only to a thermogram.
Thermometric Titration
Thermometric titration is a titration in which temperature change is monitored as the titrant is added.
The reaction between analyte and titrant causes an enthalpy change, producing a measurable temperature response.
The endpoint can then be identified from the temperature-versus-volume data.
This is a more specialised form of titration than the familiar acid-base titration using a colour indicator.
Thin-Layer Chromatography
Thin-layer chromatography, or TLC, is a simple separation technique widely used in chemistry laboratories.
A sample is spotted near the bottom of a plate coated with a thin stationary phase.
The plate is placed in a solvent.
As the solvent rises by capillary action, components of the mixture move different distances depending on their interactions with:
the stationary phase
and:
the mobile phase.
TLC is particularly useful for quickly checking:
reaction progress
sample purity
number of mixture components
TLC
TLC is the standard abbreviation for thin-layer chromatography.
A TLC result is often described using an:
R_f value
which compares the distance travelled by a compound with the distance travelled by the solvent front.
A simplified expression is:
R_f = distance travelled by compound ÷ distance travelled by solvent front
An R_f value depends on the experimental conditions, so it is not a universal physical constant for a substance.
Titrant
A titrant is the reagent added during a titration.
Its concentration is known or otherwise defined accurately enough to determine the amount of analyte.
For example, in an acid-base titration, a standard sodium hydroxide solution might be the titrant added from a burette.
Titration
Titration is a quantitative analytical technique in which measured amounts of one reactant are added to another until the reaction reaches an endpoint or equivalence condition.
Common types include:
acid-base titration
redox titration
complexometric titration
precipitation titration
IUPAC defines titration around the measured addition of a reagent and a method for recognising when essentially all of the analyte has reacted.
Equivalence Point vs Endpoint
These terms are related but not identical.
The equivalence point is the stoichiometric point at which chemically equivalent amounts have reacted according to the reaction.
The endpoint is the experimentally observed signal used to identify that point.
An endpoint might be indicated by:
a colour change
a pH response
a voltage change
a temperature change
A good titration method makes the endpoint occur as close as practical to the equivalence point.
Titration Curve
A titration curve plots a measured quantity against the amount or volume of titrant added.
An acid-base titration commonly plots:
pH
against:
volume of titrant
The shape of the curve can provide information about:
acid or base strength
buffer regions
equivalence point
appropriate indicator choice
Titre or Titer
Titre, with the American spelling titer, has several technical meanings depending on field.
In classical analytical chemistry, IUPAC uses it for the reacting strength of a standard solution, conventionally expressed in relation to the amount of substance equivalent to a specified solution volume.
In biological and medical contexts, titer is also used differently, for example when describing concentrations determined through serial dilution.
Context therefore matters.
Toluene
Toluene is an aromatic hydrocarbon with the formula:
C₇H₈
or structurally:
C₆H₅CH₃
It can be thought of as a benzene ring bearing one methyl group.
Toluene is widely used as:
a solvent
an industrial feedstock
a starting material in chemical synthesis
Its systematic substitutive name is methylbenzene.
Toluene is volatile and flammable.
Taxol
Taxol appears on the original WordsDetail page, but it needs qualification.
Taxol is a trade name historically associated with paclitaxel, a complex natural-product-derived compound used in cancer treatment.
For chemistry vocabulary, paclitaxel is the more useful generic compound name.
The molecule is notable in organic and medicinal chemistry because of its complex structure and challenging history of synthesis.
I would therefore not present Taxol as though it were simply a general chemistry term without explaining that it is a brand/trade name.
Toxicity
Toxicity describes the capacity of a substance to produce harmful effects in a biological system.
Toxicity is not a single fixed property that can be summarised only as:
toxic
or:
non-toxic.
It depends on factors including:
dose
route of exposure
duration
chemical form
organism
metabolism
This is why the statement:
The dose makes the poison.
captures an important principle in toxicology.
Toxicant
A toxicant is a substance capable of causing toxic effects.
It is often used particularly for harmful substances arising from human activity or exposure.
The related word toxin is more often reserved for poisonous substances produced biologically, although everyday usage is much looser.
Toxin
A toxin is a poisonous substance produced by a living organism.
Examples may be produced by:
bacteria
fungi
plants
animals
Not every toxic chemical is therefore technically a toxin.
Calling industrial chemicals “toxins” can be chemically imprecise.
Teratogen
A teratogen is an agent capable of disturbing development of an embryo or fetus and potentially producing developmental abnormalities.
Teratogens may include:
certain chemicals
some medicines
some infections
physical agents
The term occurs in toxicology and medicinal chemistry.
It is more accurately a toxicological term than a core general-chemistry concept.
Tracer
A tracer is a substance or labelled species used to follow the movement, distribution or transformation of material.
Chemical tracers may involve:
radioactive isotopes
stable isotopes
fluorescent labels
other detectable markers
A tracer is ideally used in a way that does not significantly alter the process being investigated.
Radioactive Tracer
A radioactive tracer contains a radioactive isotope whose radiation can be detected.
Tracers can be used to study:
chemical pathways
biological processes
fluid movement
industrial systems
The isotope behaves chemically much like the corresponding stable element while providing a detectable nuclear signal.
Trans Isomer
Trans describes a stereochemical relationship in which specified groups lie on opposite sides of a relevant structural feature.
A classic example is:
trans-2-butene
For a simple alkene:
cis often means similar groups are on the same side;
trans means they are on opposite sides.
However, the more general E/Z nomenclature is required when cis/trans terminology becomes ambiguous.
Transesterification
Transesterification converts one ester into another through exchange of its alkoxy component.
A simplified reaction is:
ester + alcohol ⇌ new ester + new alcohol
The reaction may be catalysed by:
acid
base
enzymes
Transesterification is industrially important in processes including biodiesel production.
Transition Metal
Transition metal is a commonly used term for metals associated with the d-block and characteristic d-electron chemistry.
However, definitions require some care.
IUPAC’s transition-element definition focuses on elements whose atoms have incomplete d subshells or that can form cations with incomplete d subshells.
This means the everyday statement:
Every d-block element is automatically a transition metal.
can depend on the exact definition being used.
For introductory chemistry, familiar transition metals include:
iron
cobalt
nickel
chromium
manganese
Transition-Metal Chemistry
Transition metals are notable for properties including:
variable oxidation states
coloured compounds
coordination complexes
catalytic activity
magnetic behaviour
These arise in large part from their d-electron configurations.
Not every transition-metal compound displays every one of these properties.
Transition State
A transition state is a high-energy configuration along a reaction pathway between reactants and products.
It is not an ordinary isolable intermediate.
A reaction-coordinate diagram often shows the transition state near the top of an energy barrier.
The energy required to reach this region is related to:
activation energy
or, in transition-state theory:
activation free energy
Transition states are conventionally represented using the symbol:
‡
Transition State vs Intermediate
An intermediate corresponds to a local energy minimum and may sometimes have a finite lifetime long enough to observe or trap.
A transition state corresponds to the barrier between minima.
It cannot normally be isolated as a bottle of material.
This is an important distinction in reaction mechanisms.
Transmutation
Transmutation means converting one chemical element or nuclide into another through a nuclear process.
Chemical reactions cannot transmute elements because ordinary chemistry rearranges electrons and atoms without changing the number of protons in nuclei.
Nuclear processes can.
Examples include:
radioactive decay
neutron capture
nuclear bombardment
Changing the proton number changes the identity of the element.
Translational Energy
Translational energy is energy associated with the motion of a particle or molecule through space.
Molecular energy can be distributed among:
translational
rotational
vibrational
electronic
degrees of freedom.
The relative importance of these forms matters in statistical mechanics, spectroscopy and reaction dynamics.
Trigonal Planar
Trigonal planar geometry has three positions arranged around a central atom in one plane.
Ideal bond angles are approximately:
120°
Boron trifluoride, BF₃, is the classic example.
The central boron has three bonding domains and no lone pair in the simple VSEPR picture.
Trigonal Pyramidal
Trigonal pyramidal geometry consists of three bonded atoms and one lone pair around a central atom with tetrahedral electron-domain geometry.
Ammonia, NH₃, is the standard example.
The molecular shape is pyramidal rather than planar because the nitrogen lone pair occupies one of the four electron-domain positions.
Triple Bond
A triple bond has formal bond order three.
A carbon-carbon triple bond in an alkyne consists of:
one sigma bond
and:
two pi bonds.
A familiar example is ethyne:
HC≡CH
Nitrogen gas also contains a strong triple bond:
N≡N
Triple bonds are generally shorter than comparable single or double bonds between the same types of atoms.
Triple Point
The triple point is the unique combination of pressure and temperature at which three phases coexist in equilibrium.
For a pure substance, this commonly means:
solid
liquid
gas
all present together.
Water’s triple point has historically played an important role in temperature metrology.
The triple point should not be confused with the normal melting point or normal boiling point.
Tritium
Tritium is the radioactive isotope of hydrogen written:
³H
or:
T
Its nucleus contains:
one proton
and:
two neutrons.
Compare the three familiar hydrogen isotopes:
protium — ¹H
deuterium — ²H or D
tritium — ³H or T
Tritium undergoes beta decay.
Tritium vs Hydrogen
Tritium is still chemically hydrogen because it has one proton.
Its additional neutrons alter its mass and nuclear stability.
Isotopic substitution can also produce measurable differences in reaction rates and physical properties, particularly when hydrogen isotopes are involved.
Tyndall Effect
The Tyndall effect is the scattering of light by particles in a colloidal dispersion or very fine suspension.
A beam of light may become visible as it passes through the material because particles scatter some of the incoming radiation.
This can help distinguish certain colloids from true molecular solutions.
The effect is named after physicist John Tyndall.
Colloid
A colloid contains dispersed particles larger than ordinary dissolved molecules but small enough to remain distributed through another medium for significant periods.
Examples include many:
emulsions
aerosols
sols
gels
The Tyndall effect is commonly associated with these dispersed systems.
Turbidity
Turbidity refers to cloudiness or reduced clarity caused by suspended or dispersed particles.
It is important in:
water analysis
environmental chemistry
colloid science
industrial processes
Turbidity is often assessed by measuring how particles scatter light.
Turbidimeter
A turbidimeter is an instrument used to measure turbidity.
Different instruments and standards may report turbidity using units such as:
NTU — nephelometric turbidity units
depending on the measurement method.
Turbidity does not directly tell you the chemical identity of the suspended particles.
Torr
The torr is a non-SI unit of pressure.
It is defined as:
1/760 of a standard atmosphere
and is close to one millimetre of mercury.
Torr is still encountered in:
vacuum science
gas handling
physical chemistry
The SI unit of pressure is the pascal, Pa.
Tensile Strength
Tensile strength describes how much tensile stress a material can withstand before failure.
It belongs primarily to:
materials science
polymer chemistry
engineering
rather than general chemistry.
It becomes especially relevant when studying:
polymers
composites
metals
fibres
The original WordsDetail page was reasonable to include it, but it needs that materials-science context.
Thermosetting Polymer
The older page lists thermosetting plastic.
A broader chemical term is thermosetting polymer.
A thermosetting polymer forms a heavily crosslinked network during curing and cannot simply be melted and reshaped repeatedly like a typical thermoplastic.
Examples include certain:
epoxy resins
phenolic resins
polyester resins
The distinction is based on polymer structure and behaviour.
Thermoplastic vs Thermoset
A thermoplastic can generally soften when heated and harden again when cooled.
A thermoset develops a crosslinked network that prevents ordinary remelting.
This difference is why the two categories behave very differently during recycling and processing.
Tincture
A tincture is traditionally a solution prepared by extracting or dissolving material in alcohol or an alcohol-water mixture.
The term is common in:
pharmacy
herbal preparations
historical chemistry
It is not a fundamental modern chemistry concept, but it does describe a genuine type of solution preparation.
Thickener
A thickener is a material added to increase viscosity.
Thickeners appear in:
food chemistry
cosmetics
paints
pharmaceuticals
industrial formulations
Depending on the application, a thickener may be:
a polymer
a polysaccharide
a mineral
an associative molecule
The term describes function rather than one specific chemical class.
TLC, TGA and Other Useful T Abbreviations
Several chemistry abbreviations begin with T:
TLC — thin-layer chromatography
TGA — thermogravimetric analysis
TMS — tetramethylsilane
THF — tetrahydrofuran
TFA — trifluoroacetic acid
TCEP — tris(2-carboxyethyl)phosphine
Not every abbreviation beginning with T belongs on a general beginner list, but some occur so frequently in laboratory chemistry that they are worth recognising.
Tetrahydrofuran
Tetrahydrofuran, commonly abbreviated THF, is a cyclic ether with formula:
C₄H₈O
It is widely used as an organic solvent.
THF is:
polar
aprotic
miscible with water to a significant degree
capable of dissolving many organic compounds
Like some other ethers, THF can form peroxides during storage, which is an important laboratory-safety consideration.
Trifluoroacetic Acid
Trifluoroacetic acid, or TFA, has the formula:
CF₃COOH
It is a strongly acidic fluorinated carboxylic acid.
TFA is frequently used in:
organic synthesis
peptide chemistry
chromatography
Its electron-withdrawing CF₃ group makes it much more acidic than ordinary acetic acid.
Tetramethylsilane
Tetramethylsilane, abbreviated TMS, has the formula:
Si(CH₃)₄
It is especially familiar from nuclear magnetic resonance spectroscopy.
TMS has traditionally been used as a reference compound for chemical shifts in:
¹H NMR
and:
¹³C NMR
Its signal is assigned:
0 ppm
under the usual convention.
Chemistry Words Beginning With T at a Glance
| Term | Meaning or use |
|---|---|
| Tantalum | Element 73, Ta |
| Tantalum pentoxide | Ta₂O₅ |
| Tautomer | Readily interconverting structural isomer |
| Tautomerism | Equilibrium between tautomers |
| Technetium | Element 43, Tc |
| Technetium-99m | Metastable radioactive isotope used in imaging |
| Tellurium | Element 52, Te |
| Temperature | Measure of thermal state |
| Tennessine | Element 117, Ts |
| Teratogen | Agent capable of disrupting development |
| Terbium | Element 65, Tb |
| Tetrahedral | Four-direction molecular geometry |
| Tetrahydrofuran | Cyclic ether solvent, THF |
| Tetramethylsilane | NMR reference compound, TMS |
| Theoretical yield | Maximum stoichiometric product amount |
| Thermal conductivity | Ability to conduct heat |
| Thermal decomposition | Decomposition caused by heating |
| Thermite | Highly exothermic metal/metal-oxide reaction mixture |
| Thermochemistry | Study of chemical heat changes |
| Thermodynamics | Study of energy, work and equilibrium |
| Thermogravimetric analysis | Mass measurement during controlled heating |
| Thermometric titration | Titration using temperature response |
| Thermosetting polymer | Polymer forming an irreversible network on curing |
| Thallium | Element 81, Tl |
| Thiol | Organic R–SH compound |
| Thioether | Sulfur analogue of an ether |
| Thiourea | CS(NH₂)₂ |
| Thionyl chloride | SOCl₂ |
| Thin-layer chromatography | Planar chromatographic technique |
| Thorium | Element 90, Th |
| Thulium | Element 69, Tm |
| Tin | Element 50, Sn |
| Tincture | Traditionally an alcoholic extract or solution |
| Titrant | Reagent added during titration |
| Titration | Quantitative reaction-based analytical method |
| Titration curve | Signal plotted against titrant amount |
| Titanium | Element 22, Ti |
| Titanium dioxide | TiO₂ |
| Toluene | Aromatic hydrocarbon C₇H₈ |
| Torr | Non-SI pressure unit |
| Toxicity | Capacity to cause harmful effects |
| Toxicant | Harmful chemical agent |
| Toxin | Poisonous substance of biological origin |
| Tracer | Labelled species used to follow a process |
| Trans isomer | Specified groups on opposite sides |
| Transesterification | Exchange reaction converting one ester to another |
| Transition metal | Metal associated with incomplete d-subshell chemistry |
| Transition state | Barrier configuration along a reaction path |
| Translational energy | Energy of motion through space |
| Transmutation | Nuclear conversion into another element or nuclide |
| Trifluoroacetic acid | CF₃COOH |
| Trigonal planar | Three-coordinate planar geometry |
| Trigonal pyramidal | Three-bonded-atom pyramidal geometry |
| Triple bond | Bond of formal order three |
| Triple point | Three-phase equilibrium condition |
| Tritium | Radioactive hydrogen isotope ³H |
| Turbidity | Cloudiness caused by dispersed particles |
| Turbidimeter | Instrument measuring turbidity |
| Tyndall effect | Light scattering by colloidal particles |
Which T Words Are Most Important for Chemistry Students?
For introductory chemistry, I would prioritise:
temperature
theoretical yield
tetrahedral
titrant
titration
transition metal
triple bond
triple point
Organic chemistry students should know:
tautomer
tautomerism
thiol
thioether
toluene
trans isomer
transesterification
transition state
THF
TFA
Analytical chemistry adds:
thin-layer chromatography
titration curve
thermogravimetric analysis
turbidity
Physical chemistry students are more likely to encounter:
thermodynamics
thermochemistry
translational energy
triple point
Nuclear chemistry contributes:
technetium
thorium
tritium
transmutation
Which Chemical Elements Start With T?
Ten current element names begin with T:
tantalum
technetium
tellurium
tennessine
terbium
thallium
thorium
thulium
tin
titanium
This makes T one of the more productive letters for element names.
What Is a Tautomer?
A tautomer is one of a set of structural forms that interconvert readily, commonly by transfer of a proton together with rearrangement of a double bond.
Keto–enol tautomerism is the best-known example.
What Is Theoretical Yield?
Theoretical yield is the maximum amount of product predicted from reaction stoichiometry based on the available limiting reactant.
Actual laboratory yield is often lower because reactions may be incomplete and material can be lost during isolation or purification.
What Is Titration?
Titration is a quantitative technique in which a measured amount of one reactant is added to another until an endpoint associated with the reaction is reached.
The amount of titrant used can then be related to the amount of analyte.
What Is the Difference Between a Titrant and an Analyte?
The titrant is the reagent being added.
The analyte is the substance being determined.
In a typical titration, titrant is delivered from a burette into a flask containing the analyte.
What Is a Transition Metal?
A transition metal is a metal associated with characteristic d-subshell chemistry.
More precise definitions focus on whether the atom or one of its common ions has an incomplete d subshell.
What Is a Transition State?
A transition state is the high-energy configuration passed through while reactants are converted into products.
It is not the same as a reaction intermediate.
What Is Thermodynamics?
Thermodynamics studies energy, heat, work, entropy and equilibrium.
It can predict whether processes are thermodynamically favourable under specified conditions but does not necessarily predict how quickly they occur.
What Is Thermochemistry?
Thermochemistry is the branch of chemistry concerned particularly with heat and enthalpy changes accompanying reactions and physical transformations.
What Is Thin-Layer Chromatography?
Thin-layer chromatography, or TLC, separates mixture components on a coated plate using a moving solvent.
It is commonly used to monitor organic reactions and compare mixture components.
What Is the Triple Point?
The triple point is the particular pressure and temperature at which three phases of a pure substance coexist in equilibrium.
What Is Tritium?
Tritium is the radioactive isotope hydrogen-3, written ³H or T.
Its nucleus contains one proton and two neutrons.
What Is the Tyndall Effect?
The Tyndall effect is visible light scattering by particles in a colloid or fine dispersion.
It can make the path of a light beam visible through the material.
What Is Toluene?
Toluene is methylbenzene, C₆H₅CH₃.
It is a volatile aromatic hydrocarbon widely used as a solvent and industrial starting material.
What Is THF?
THF stands for tetrahydrofuran, a cyclic ether widely used as an organic solvent.
What Is TMS in Chemistry?
TMS commonly refers to tetramethylsilane, Si(CH₃)₄, particularly when discussing NMR spectroscopy.
Its NMR chemical shift is conventionally assigned 0 ppm.
Is Taxol a Chemistry Word?
Taxol is a trade name associated with paclitaxel.
For a chemistry reference, paclitaxel is the more precise generic compound name, although Taxol remains historically familiar.
Is “Theory” a Chemistry Word?
Chemistry certainly contains scientific theories, but theory by itself is not usefully specific enough for an alphabetical chemistry glossary.
It is better to include the names of actual chemical theories, such as:
collision theory
transition-state theory
molecular orbital theory
The same applies to vague entries such as term or triad.
Final Thoughts
Chemistry vocabulary beginning with T covers an exceptionally broad range.
The periodic table alone contributes ten element names, from common industrial metals such as tin and titanium to radioactive technetium, thorium and synthetic tennessine.
Introductory chemistry gives us temperature, theoretical yield, tetrahedral geometry, titration, transition metals, triple bonds and the triple point.
Organic chemistry adds tautomerism, thiols, toluene, trans isomers, transesterification, THF and TFA.
Physical and analytical chemistry contribute thermodynamics, thermochemistry, thermogravimetric analysis, transition states, TLC, turbidity and the Tyndall effect.
That also shows why an alphabetical chemistry page should do more than collect words beginning with the same letter. A vague entry such as theory says very little. Explaining transition-state theory, tautomerism or titration gives the reader something they can actually understand and use.
Frequently Asked Questions
What chemistry words start with T?
Examples include tantalum, tautomer, technetium, tellurium, temperature, tetrahedral, theoretical yield, thermodynamics, thiol, titration, titanium, toluene, transition metal, transition state, triple point, tritium and Tyndall effect.
How many chemical elements start with T?
Ten current element names begin with T: tantalum, technetium, tellurium, tennessine, terbium, thallium, thorium, thulium, tin and titanium.
What is tautomerism?
Tautomerism is the rapid interconversion of related structural forms, typically involving proton transfer and rearrangement of bonding.
What is theoretical yield?
Theoretical yield is the maximum amount of product predicted from reaction stoichiometry.
What does tetrahedral mean in chemistry?
Tetrahedral describes an arrangement of four positions around a central atom pointing approximately towards the corners of a tetrahedron.
What is titration used for?
Titration is used to determine the amount or concentration of a substance through reaction with a measured reagent.
What is a titrant?
A titrant is the reagent added in measured quantities during a titration.
What is a transition metal?
A transition metal is a metal associated with characteristic d-electron chemistry, commonly involving atoms or ions with incomplete d subshells.
What is a transition state?
A transition state is the high-energy configuration occurring at the barrier between reactants and products during an elementary chemical transformation.
What is thermodynamics?
Thermodynamics studies energy, heat, work, entropy and equilibrium.
What is thermochemistry?
Thermochemistry focuses on heat and enthalpy changes associated with chemical reactions and physical transformations.
What is TLC in chemistry?
TLC stands for thin-layer chromatography, a quick planar separation technique widely used in laboratory chemistry.
What is TGA in chemistry?
TGA stands for thermogravimetric analysis, which measures changes in sample mass as temperature or time is controlled.
What is a thiol?
A thiol is an organic compound containing an –SH functional group.
What is thionyl chloride?
Thionyl chloride is SOCl₂, a laboratory reagent frequently used in organic chemistry.
What is toluene?
Toluene is the aromatic hydrocarbon methylbenzene, C₇H₈.
What is transesterification?
Transesterification converts one ester into another by exchanging the alcohol-derived portion of the ester.
What is a triple bond?
A triple bond has formal bond order three and commonly consists of one sigma bond and two pi bonds.
What is a triple point?
The triple point is the pressure and temperature at which three phases of a pure substance coexist at equilibrium.
What is tritium?
Tritium is radioactive hydrogen-3, written ³H or T.
What is the Tyndall effect?
The Tyndall effect is light scattering by particles in a colloidal dispersion.
What is titanium dioxide?
Titanium dioxide is TiO₂, a white inorganic compound widely used as a pigment and functional material.
Why is tin’s symbol Sn?
The symbol Sn comes from the Latin name stannum.
What is technetium-99m?
Technetium-99m is a metastable radioactive isotope widely used in medical diagnostic imaging.